Gate guides for Banbury homes, OX15 to OX17

Old gates

Converting or Repairing a Gate in Banbury

Many people ask whether the gate they have can be powered. HSE has views on who becomes responsible when an old gate is converted, and on what to check first. This page quotes it and gives questions to ask.

A pair of weathered timber field-style gates with moss, iron hinges and diagonal braces between ironstone walls at the entrance to a cottage drive

The gate that is there

The base of a dark metal gate leaf beside its hinge post, with a flush steel plate set into the block paving underneath and a scatter of oak leaves

A field-style gate with iron hinges, moss on the timber and one leaf that sags is a familiar sight on a village drive. A motor changes what the gate has to do, and that is the point HSE and the manufacturer FAAC both make. FAAC puts it simply:

Safety has to come first, an existing manual gate is not always designed with automation in mind.

Source: FAAC UK, top 10 factors when automating swing gates, viewed 19 November 2026. A manufacturer’s own guidance.

Who becomes responsible

HSE says that turning a manual gate into a powered one brings the same rules as a new powered gate:

The same requirements apply to the conversion of existing manual gates to powered operation.

Source: HSE, powered gates: the basics, viewed 19 November 2026.

It goes further on who then carries the duty:

in most of these cases the ‘converter’ or ‘installer’ becomes the product manufacturer (the ‘Responsible Person’ in law)

Source: HSE, powered gates: legal responsibilities, viewed 19 November 2026. Quoted from a longer sentence.

HSE adds that hinges are a particular point for converted gates, because the gap near a hinge can create a crushing risk that is harder to design out when an old gate is reused. Ask what will be done about that on a gate that already has hinges in place.

Repair instead of conversion

A gate that sticks or sags is a different matter from a gate being powered. The sources opened for this page do not cover repairing ordinary gates, so no advice is offered here beyond this: if a motor is planned later, say so when the repair is quoted.

Questions to put

  • What state is the old gate in, and what will be checked or replaced before a motor goes on?
  • Who is the responsible person for the powered gate as a whole, and will the papers say so?
  • What will be done about the hinge and any gaps near it?
  • Will the posts, pillars and ground take the loads and the movement?
  • What does the handover include?

Sources: FAAC UK, top 10 factors when automating swing gates; HSE, powered gates: the basics; HSE, powered gates: legal responsibilities. Viewed 19 November 2026.

Got a gate already?

A photo of the gate and its posts tells an installer a great deal.