Questions first
What to Ask an Electric Gate Installer in Banbury
Quotes for the same entrance can end up describing different jobs. The lists below gather questions to ask and to have answered in writing, taken from HSE, a manufacturer and the other pages here. They cover what to ask and say nothing about what anyone offers.

About the survey and the gate
- What did the survey cover, and what was measured?
- Is there a written risk assessment for this gate on this drive?
- Which gate type, motor and material are proposed, and why?
- How have wind and the fall of the drive been allowed for?
- If an old gate is reused, what was checked on it?

About safety features
HSE’s safety alert tells owners what to ask a maintenance company to show them:
light beams to detect a person or object in the way of the closing gate;
Source: HSE safety alert OPSTD 1-2011, powered perimeter gates, viewed 19 November 2026.
- Which safety edges, beams and other devices go on every moving edge?
- Will the forces the gate applies be measured, and recorded?
- How do the parts work together, and how will they be checked after fitting?
- How is the gate released by hand, and who will show me?
On force testing, HSE says Where force limitation is the safety strategy employed, details of specific force tests should be provided.
Source: HSE, ensuring powered doors and gates are safe.
About wiring and the power supply
- What supplies the power, and how long is the cable route?
- Who does the electrical work, and which competent person scheme do they belong to?
- How is the cable protected from damage and water?
About the paperwork
HSE describes what should be handed over:
In all cases certain minimum information should be handed over to the user, including copies of relevant instructions and recommendations for safety checks and maintenance.
Source: HSE, powered gates: legal responsibilities, viewed 19 November 2026.
- Which documents come with the gate, including user instructions?
- What is in writing about problems found once work starts?
- Is any guarantee offered, what would it cover and who would honour it?
- Which memberships or training courses are mentioned, and can they be confirmed with the organisation concerned?
A manufacturer’s guidance says installers are not all required to follow specific training or safety standards, and that asking questions helps. Source: FAAC UK, how to pick the right installer for your gate. Membership claims deserve a check with the organisation that holds the list.
About looking after the gate
The same manufacturer recommends that automatic gates are maintained annually and possibly more frequently on busy sites
. Source: FAAC UK, top 10 factors when automating swing gates. HSE says of maintenance that Component parts can wear and fail, sometimes catastrophically.
Source: HSE, ensuring powered doors and gates are safe. Ask who will check the gate, how often and what is recorded.
Questions answered?
Send what you learn with a picture of the entrance.