Motors and access
Gate Motors, Keypads and Remotes: Banbury Guide
Motors, release levers, keypads and intercoms are the parts a household notices. This page uses a manufacturer’s own guidance and HSE for what each does, what happens in a power cut and what to ask.

Motors

A powered gate has a motor, often called an operator, that moves each leaf or the sliding leaf. A swing operator can sit above ground, on an arm fixed to the gate post, or under the ground, with a cover plate set into the paving, as in the picture. FAAC describes underground swing operators and says they have a way to unlock from outside as standard.
Which kind suits a drive is a matter for the survey. The same manufacturer says wind and the way a gate is boarded are reasons the operator must be chosen for the gate in question.
Power cuts
Gates are electrical machines, so a cut in supply matters. The manufacturer’s advice for a gate that is the only way in is plain:
If this gate is the only method of entry then make sure your system has a method of unlocking from the outside.
Source: FAAC UK, top 10 factors when automating swing gates, viewed 19 November 2026. A manufacturer’s own guidance.
HSE says something close from the safety side. A user, it says, should be told how to switch the machine off or to a safe mode, and how to release a person who is trapped:
Users should be given information on how to safely switch the gate off, or into a safe mode such as hold-to-run, and where necessary, how to release a person if they become trapped by the gate.
Source: HSE, powered gates: legal responsibilities, viewed 19 November 2026.
Battery backup is described by the same manufacturer as an optional addition to some of its low-voltage systems. Whether that is wanted is one for the installer to answer.
Keypads, intercoms, remotes and apps

FAAC lists the ways of telling a gate to open: remote, keypad, intercom, vehicle detector, tag reader, mobile app and number plate recognition. Its guidance on choosing between them is brief:
Any one of these or a combination can be used. The right solution will depend on how many users are coming through the gate, if they are expected by the gate owner or could turn up unannounced.
Source: FAAC UK, top 10 factors when automating swing gates, viewed 19 November 2026.
Wiring is electrical work
A cable has to run from the house to the gate, and in a district of long drives that can be a distance. The rules page quotes the Building Regulations on electrical installations in gardens. Ask who will do the wiring, how it will be protected and which competent person scheme the electrician belongs to.
Questions to put
- Which motor type is proposed, and why for this gate?
- How is the gate released by hand in a power cut, and who will show me?
- Which ways of opening are included, and who sets up the codes?
- How is the cable run protected, and who does the wiring?
- What happens to the controls if the power fails and comes back?
Sources: FAAC UK, top 10 factors when automating swing gates; HSE, powered gates: legal responsibilities. Viewed 19 November 2026.
Describe your entrance
Say where the power is and what you would like to open the gate with.